DOD SR400D Spezifikationen PDF herunterladen (Seite 66)

 12. If the engine does not start, repeat STEPS 5 - 8

and try again. If it still does not start, check the

spark plug gap (0.020mm). Because it has an

electronic ignition, there are no points to gap.

 13. As the engine warms up, slowly move the choke

lever to the "RUN" position (lever up).

OPERATING PROCEDURES: MIST SPRAY AND ULV

 14. a. Set the engine throttle at half speed, and after the

engine is operating smoothly, open up the inline

flow valve (mist spray and large ULV operations),

and the volume control cock.

 b. Calibrate the system (The liquid must pass

through the metering system and must be

separate from the air flow).

 c. For adjusting the liquid flow rate to the label and

application specifications, use the volume control

cock (mist spray) or slide bar (ULV).

DUSTS AND GRANULES

 15. a. Set the engine throttle halfway and after the

engine is running smoothly, twist the plastic

discharge tubing where the pesticide feed hose

connects to it. (With the engine set at half throttle

and the pesticide discharge tube open all the

way; the unit will put out approximately 5 kg/min).

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 66