DOD SR400D Spezifikationen PDF herunterladen (Seite 15)

 7. Check for proper pressurization and the possibility

of leaks in the system by adding water to the tank.

Leave approximately 1/3 of the tank empty for an

air gap.

 8. Replace the rod/piston assembly cylinder back into

the tank.

 9. To properly pressurize the tank, pump the unit 6-10

times. Depress the trigger on the wand. Check for

water and air leaks in the hose, tubing, wand and

tank seals. Repair all leaks.

 10. Discontinue spraying the water and slowly relieve

the tank pressure by turning knurled nut

counterclockwise where hose connects to the top

of the tank.

 11. Remove the pump assembly and dump out the

water.

OPERATING PROCEDURES

 12. Put on all personal protective gear.

 13. Calculate the exact amount of pesticide needed for

the operation.

 14. Add the calculated amount of carrier first and then

add the pesticide through a 60-mesh screen filter,

to bring the solution up to the label's

recommendation.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 15