DOD SR400D Spezifikationen PDF herunterladen (Seite 222)

214

PERFORMANCE CHECKLIST FOR THE

ACME CYANOGAS FOOT PUMP MODEL 50

SETUP PROCEDURES

 1. Lift the bottom tabs of the cap spring and remove

the piston assembly from the cylinder. TILT THE

PISTON ASSEMBLY AT THE TOP SO IT CAN

CLEAR THE CARRYING LOOP NUT.

 2. Remove any dust and dirt and then run an oily

cloth (any light type of oil will do) through the

cylinder and work some oil into the leather piston

cup with your fingers to keep it soft and pliable. BE

SURE TO REMOVE ANY EXCESS OIL BEFORE

REPLACING THE PISTON ASSEMBLY.

 3. Unscrew the pesticide jar and ensure that it is

clean and dry.

 4. Lay the duster on its side with the pesticide cut off

lever, located at the base of the plunger, in the

"dust" position (the lever should be

PERPENDICULAR to the ground).

 5. Release the air jet nozzle by pulling out the cut off

lever.

 6. Wipe all of the parts free of any dust and replace

the nozzle. Make sure that the nozzle washer is

returned to the proper position. USE NO OIL ON

THIS CUT OFF MECHANISM.

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 222