DOD SR400D Spezifikationen PDF herunterladen (Seite 203)

195

 28. When there are to be longer delays in operations,

FIRST turn off the pump and then switch the

throttle control on the instrument panel down to

"IDLE".

TERMINATING PROCEDURES

 29. After completing your spray operation, turn the 4-

way valve on the control module to "FLUSHING".

 30. Resume operations at full engine speed and reset

the "LED" readout to 10-ounces/minute, flow rate.

Run the machine for a minimum of 2 minutes.

 31. Turn the pump switch, on the instrument panel to

"Off".

 32. Run the engine at "IDLE" for 5 minutes for every

hour of actual spraying time. This helps to prevent

damage to the engine.

 33. Close only the gasoline valve located at the

carburetor and let the engine run on "IDLE" until it

runs out of gas.

 34. Turn the throttle control switch on the instrument

panel from "IDLE" to "OFF".

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 203