DOD SR400D Spezifikationen PDF herunterladen (Seite 235)

227

 5. Put on all Personal Protective Gear.

 6. Add half of the required diluent to the tank.

Calculate the amount of pesticide needed and add

to the spray tank. When using a wettable powder,

turn on the pump and turn the black valve handle

so that it is “inline” with the tubing, in order to aid in

mixing. Hydraulic sprayers use Emulsions,

Suspensions and Solutions ONLY. After mixing,

add the remainder of the diluent. Let the pesticide

mix well before spraying. NOTE: 4 oz. of

Kerosene or Diesel may be added to the tank to

prevent foaming. Sprayer should be calibrated to

check the flow rate. Make sure the “O” ring in the

lid is in place.

 7. You are now ready to spray. Turn on the pump at

the rear of the pump. Pull the trigger of the spray

gun to start spraying. The spray pattern may be

adjusted by turning the knurled knob, located

behind the trigger.

TERMINATING PROCEDURES

 8. Drain the remaining pesticide into the proper

container, using the spray gun, or by removing the

drain plug in the bottom of the tank. NEVER store

pesticide in the tank!

 9. Flush out the tank, hose and the spray gun by

adding 3-5 gallons of water/detergent mixture.

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 235