DOD SR400D Spezifikationen PDF herunterladen (Seite 187)

179

 17. Set the flow rate. Remove the white cover off the

pump assembly box. Set the blue pump pointer to

the desired flow rate in ounces per minute.

CAUTION: You must check the flow rate by

collecting the fluid from the pesticide line at the

nozzle/solenoid connection for one or two minutes.

Readjust the flow on pump metering pointer.

NOTE: Engine must be running to operate the belt

driver pump.

SPRAY OPERATING PROCEDURES

 18. Turn on spray by moving flow control toggle switch

to the ON position.

 19. The rate of speed during spray operation is

generally 5 mph or 10 mph. The correct speed for

each pesticide is indicated in the label.

 20. When stopping for a short period of time, turn off

the pump using the toggle switch on the remote

control module.

TERMINATING PROCEDURES

 21. Turn off the pesticide flow first.

 22. Then turn off engine switch.

 23. Drain any remaining pesticide from the pesticide

tank into its original container via the pesticide

tubing at the nozzle, using pump switch.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 187