DOD SR400D Spezifikationen PDF herunterladen (Seite 29)

PRE-OPERATION OF THE CURTIS DYNA-FOG

MODEL 2610 (Fig. 1)

 1. Fuel: filtered (#60 mesh size) regular unleaded gas

only. Never try to refuel a machine that is hot.

 2. Batteries: (8) 1.5V “D” Duracell

 3. Insecticide: oil base only, filtered through a 100-

mesh screen

STARTING/STOPPING PROCEDURES

 4. Lift then press down the “ON/OFF” control knob to

the “ON” position.

 5. Depress and release the “primer bulb” repeatedly

until fuel is visible in the “primer bulb”.

 6. Once fuel has reached the “primer bulb”, depress

and release the bulb 3 times for a cold engine/1

time for restarting a hot engine.

 7. Simultaneously depress “ignition” and “air” buttons

until engine begins to start, then release the “air”

button and continue depressing the “ignition”

button until engine runs smoothly (CAUTION.

HEARING PROTECTION REQUIRED).

 8. If engine has not started within 40 seconds, repeat

steps 3 and 4.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 29