DOD SR400D Spezifikationen PDF herunterladen (Seite 147)

139

OPERATING PROCEDURES

 18. Adjust Air Pressure by pulling OUT or pushing IN

the Engine Speed Control Ring on left side of

engine.

 19. Put on all Personal Protective Equipment.

 20. Add the calculated amount of pesticide to the 12-

gallon polyethylene tank located on the right rear of

the unit. (Remember, ULV/ULD machines use

only concentrated liquid formulations).

 21. Place Function Select Dial on the Remote Control

Box to #1 - #4 position as required. (See page 23

of Owners Manual)

 22. You are now ready for ULV spraying.

 23. The rate of vehicle speed during the spray

operation is 5 OR 10 mph. The correct speed for

each type pesticide is indicated on the Pesticide

Label.

 24. When stopping for a short period of time, turn the

Remote Control Output Switch to the OFF position.

 25. After completing spray operation, with the engine

still running, turn the Flush/Spray Solenoid Switch

on the Remote Control Box to “FLUSH” for two (2)

minutes at 10 ounces per minute.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 147