DOD SR400D Spezifikationen PDF herunterladen (Seite 31)

 18. After 4-hours of operation, clean exhaust tailpipe

with clean-out brush provided with the unit.

 19 After 8-hours of Operation:

 (a) Remove spark plug and scrape loose carbon

in engine neck.

 (b) Spark plug gap is .060 inches. Install hand

tight only with rubber O-ring installed on plug.

 (c) Remove and clean formulation filter.

 20. After 12 hours of operation:

 (a) Check fuel filter located inside housing unit

near engine.

 (b) Remove and clean formulation injection orifice

located in-line, midway under the exhaust

tube. Use aerosol carburetor cleaner or

approved solvent.

 21. Always remove batteries prior to storage.

 22. After cooling down with a general purpose cleaner

(i.e., Spray On-Wipe Off or equivalent), wash off

exterior of machine.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 31