DOD SR400D Spezifikationen PDF herunterladen (Seite 186)

178

STARTUP PROCEDURES

 10. Turn the ignition switch to the ON position. The

switch is located on the right front side of engine.

 11. Push the started button in to start. The starter

button is located to the left of the ignition switch.

Push until the engine starts, but no longer than 30

seconds. CAUTION: HEARING PROTECTION

REQUIRED.

 12. As the engine warms up, open the choke.

 13. Check the nozzle tip air pressure indicated, or

remote control panel air pressure gauge. Pressure

should read 75-85 psi. Adjust the air pressure by

adjusting engine’s carburetor rpm's. It may be

necessary to periodically remove and clean spray

tip (use acetone). Check all connections for air

leaks.

 14. Shut down system after checking for leaks and

proper operation.

 15. Put on all personal protective gear.

 16. Add the calculated amount of pesticide to the

large, black, polyethylene plastic tank. (Remember,

ULV/ULD machines use only ULV/ULD labeled

insecticides.)

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 186