DOD SR400D Spezifikationen PDF herunterladen (Seite 192)

184

 4. Close the choke located at front of engine. Move

lever to choke position (right).

 5. Move the throttle control to fast position (right).

Remove engine air filter cover to check the air filter,

also check choke operation.

 6. Connect the electrical power supply (remote control

unit). Electrical power is required to operate the

solenoid valve that controls the pesticide flow.

Ensure the remote is in the off position before

connecting to a 12-volt battery (12 volt battery

should only be used). The power supply used can

be an external rechargeable 12-volt battery or the

unit can be connected to a vehicle cigarette lighter

(for non-tactical vehicles).

START-UP PROCEDURES

[CAUTION: HEARING PROTECTION REQUIRED]

 7. Pull the starter rope until the engine starts. If the

engine floods repeat if necessary with choke in RUN

position and throttle in fast. Remove spark plug for

inspection and spark. If it still won’t start clean the

sparkplug and ensure gap is 0.030 inches, or

replace with “Champion RJ19LM.”

 8. Open choke as engine warms up, then shut off

engine. To shut off engine, do not move control to

CHOKE to stop engine. Move throttle lever to idle or

slow. Then move lever to stop position (left).

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 243 244

Keine Kommentare

DOD SR400D Spezifikationen Seite 192