Dod GS30 Bedienungsanleitung PDF herunterladen (Seite 11)

. Connect your instrument to the GS30 input jack.

a.(mono) Connect the left output to the input of your amplifier, or line input of a mixing console.

b. (stereo) Connect the left and right outputs to the inputs of two amplifiers, or two line inputs of a mixing

onsole.

. Set the tone controls of the amplifier(s) or mixing console to the flat or 0 position. If you are running stereo

into a mixer set the pan controls hard left and hard right. Turn your amplifier or mixer’s volume level down.

. Apply power to the GS30 by connecting the PS750 from the power jack to an AC outlet.

. Turn the power switch of your amplifier or mixer to the “on” position.

. Begin playing and gradually increase the amplifier or mixer’s volume until the desired level is achieved.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Keine Kommentare

Dod GS30 Bedienungsanleitung Seite 11